Modern, all-in-one, automatically-controlled single distillation water distiller made of stainless steel. Designed for producing high quality distillate without full-time personnel control. CE-certified.
Features:
- Monoblock (all-in-one) design with built-in tank
- High quality distilled water - conductivity approx 2,5 µS/cm (at 25° C)
- Low cost, comparing to distiller + separate tank systems
- Electronic control system automatic water and power cut-off when tank is full and automatic start, after distillate withdrawal
- Original design, which allows to produce distilled water with temp. about 35-40° C without separate chiller
- Electronic leakage protection system with solenoid valve
- Easy-access evaporator, condenser-tank for effortless maintenance (cleaning, etc)
- Easily replaceable condenser
- Automatic level control in the evaporator
- Visual control of the distillate level in the tank (through glass level-tube on the front panel)
- All parts that contact water or steam are made of high-quality stainless steel
- Stainless steel tubular heater with extended resourceÂ
- Thermostatic low-water cut-off safety system
- All parts for installation included (ready for use out-of-the-box)
- 2-year worldwide warrantyÂ
Distillation capacity
4 l/h
Water consumption
40 l/h (10 l per 1 l of distillate)
Energy consumption
3 kW/h (0.75 kW/l)
Power supply
230 V / 50 Hz, 3 kW, single phased
Distillate conductivity
2,5 µS/cm (at 25° C)
Heater material
Stainless steel
Dimensions (W x D x H)
630 x 350 x 490 mm
Continuous operating mode / break duration
8 hrs / 2 hrs
Time to operating mode from cold start
15 min
Mean time between failure
3500 hrs
